HF welding machine Kiefel 4kW-15kN with manual side-to-side tray system (2 trays), 4kW generator and pneumatic press max. 15kN, completely overhauled:

• Completely overhauled.
• Kiefel 4kW generator type G4000 Sd, used and completely revised, with ESA19Sd anti flash detection, outputbox AP1Sd and EMR10 auto tuner.
• Hydraulic portal press with max. press pressure 15kN, with press platen surface 580 x 400 mm, provided with fully-closed EMC protection.
• Electrically heated upper press platen maximum 80ºC.
• Safety according to the governing EC norms.
• Please feel free to contact us for customised specification possibilities and options.

HF welding machine Kiefel KST 70/40-HF G8000SdD with automatic side-to-side tray system (2 trays), 8kW generator and a press driven by an electric servo maximum 15kN, completely overhauled:

• Kiefel 8kW generator type G8000SdD;
• Portal press with maximum press pressure of 15kN by means of an electric servo-drive;
• press platen surface ca. 700 x 400 mm, equipped with fully-closed EMC protection.
• Automatic side-to-side tray system with 2 work positions.
• Please feel free to contact us for customised specification possibilities and options.

2x HF welding machine Kiefel KMH 10 – G4000Sd with automatic 4-station turntable system, 4kW generator and 10kN press, completely overhauled:

• Kiefel 4kW generator type G4000SdD;
• C-press with maximum press pressure of 10kN by means of an electric servo-drive;
• press platen surface 500 x 350 mm, equipped with fully-closed EMC protection.
• Turntable 4 x 90º
• Please feel free to contact us for customised specification possibilities and options.

HF welding machine Herfurth Trumpf 11000, with manual side-to-side tray system (2 trays), 8kW generator and hydraulic 25kN portal-press:

• Herfurth Trumpf 11000 Generator with 8kW power triode (valve)
• Hydraulic 25kN press
• Welding surface ca. 900 x 650 mm.
• 2 manual trays, dimensions 950 x 650 mm.
• In very good condition.

HF welding machine Relco TR-7 with enlarged manual tray system, 7kW Generator and pneumatic 10kN press, completely overhauled:

• Generator 7kW;
• Pneumatic portal press 10kN.
• Welding surface ca. ca. 700 x 500 mm.
• 1 enlarged manual tray ca. 1500 x 700 x 80 mm.
• complete EMC protection, Safety according to the governing EC norms.
• completely overhauled, in very good condition.

Radyne HF welding machine with 3kW Generator and pneumatic C-pers, in very good condition:

• Radyne 3kW Generator type 30CW;
• Pneumatic C-pers pressforce max ca. 3kN
• In very good condition.

4 movable conveyors:

• Year of construction 2009, hardly used, almost new.
• Transport length 3 meters, max. transport width 40 cm, product width 50 cm (because of photocell detection).
• Excluding side guards.
• Equipped with height adjustable supports with transport wheels and brake.
• Adjustable transport speed by means of frequency convertor in small controls cabinet.
• Emergency safety cord on both sides, Safety according to the governing EC norms.
• Equipped with photocell detection at end of conveyor (automatic start – stop).

Thermo sealmachine 200ºC – 600kN for various (labatory-) applications:

• Hydraulic press 600kN, press hub ca 40 mm;
• Press platen surface ca. 600 x 450 mm
• Both upper press platen and underpress platen are separately heated till max. 200ºC (separate temperature control).
• Manual tray with heat resistant and heat transferring stretch foil, for optimal heat transfer on both under- and upper side.
• completely overhauled, in very good condition.